Inline Single Knife Trimmer to facetrim perfect bound and thread sewn soft cover book blocks with flaps

The machine is positioned either before or after the three knife trimmer of the line. If no face trim is required, the unit operates like a conveyor belt

Internationally patented machine

Easy and quick format change
Only approximately three minutes are required for changing size automatically by simply keying in the book dimensions (length,width and thickness ) via the touch screen

Tungsten Carbide knife cuts against plastic stick
Perfect trim quality thanks to innovative technology used

No marking on the cover
EasyFly does not use vacuum or suckers, but accomplishes the opening by working in the trim away area of the book, thus avoiding any damage whatsoever on the cover

Long flaps? no problem
EasyFly can handle long or multiple fold flaps without any problem

Capability of personalizing the book
Opening only the bottom or the top cover, or, if required just a single cover is achieved by an easy setting

Two-up mode
Due to the considerable length of the knife, production speed can be increased at any moment by changing from the one-up into the two-up mode. The maximum book size to be run two-up depends on the book thickness according to the chart shown below

No change of traditional layouts
EasyFly can be positioned before or, if required, after the three knife trimmer by just replacing a piece of conveyor, without changing the layout of the existing line

Unit used as through-pass
By simply pushing a button EasyFly is transformed into a regular conveyor belt, no bypass or similar equipment needed.